Door Locks
See also:
Rear Axle Fluid Level Check
The rear axle oil level needs to be between 1/8 in (3 mm)
below the bottom of the fill hole and the bottom of the fill
hole.
The rear axle fill and drain plugs should be tightened to
22 to 29 f ...
To Vary The Speed Setting
While ACC is set, you can increase the set speed by
pressing and holding the RES + button. If the button is
continually pressed, the set speed will continue to increase
in 5 mph (8 km/h) increme ...
What Causes Corrosion?
Corrosion is the result of deterioration or removal of paint and protective coatings
from your vehicle.
The most common causes are:
• Road salt, dirt and moisture accumulation.
• Stone and gr ...


