Washing
• Wash your vehicle regularly. Always wash your vehicle in the shade using MOPAR CarWash or equivalent, or a mild car wash soap, and rinse the panels completely with clear water.
• If insects, tar, or other similar deposits have accumulated on your vehicle, use MOPAR Super Kleen Bug and Tar Remover or equivalent to remove.
• Use a high quality cleaner wax, such as MOPAR CleanerWax or equivalent, to remove road film, stains, and to protect your paint finish. Take care never to scratch the paint.
• Avoid using abrasive compounds and power buffing that may diminish the gloss or thin out the paint finish.
CAUTION!
• Do not use abrasive or strong cleaning materials
such as steel wool or scouring powder, which will
scratch metal and painted surfaces.
• Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals.
See also:
Checking Oil Level
To assure proper lubrication of your vehicle’s engine, the engine oil must be
maintained at the correct level. The engine oil level should be checked five minutes
after a warmed up engine has be ...
Electronic Sway Bar Disconnect — If Equipped
Your vehicle may be equipped with an electronic disconnecting stabilizer/sway
bar. This system allows greater front suspension travel in off-road situations.
This system is controlled by the SWAY B ...
3.6-liter Pentastar V-6 Engine
Compact and lightweight, the all-aluminum 3.6-liter Pentastar V-6 engine is
more than 40 kg (90 lbs) lighter than the previous 3.8-liter V-6 engine that was
constructed with a cast-iron block. The ...


