Front Passenger Easy Entry Seat — Two-Door Models

Jeep Wrangler / Jeep Wrangler Owner's Manual / Understanding The Features Of Your Vehicle / Seats / Front Passenger Easy Entry Seat — Two-Door Models

Pull upward on the recline lever (toward the rear of the vehicle) and slide the entire seat forward.

Easy Entry Lever
Easy Entry Lever

Easy Entry Seat
Easy Entry Seat

To return the seat to a sitting position, rotate the seatback upright until it locks and push the seat rearward until the track locks.

NOTE:
• The front passenger seats have a track memory, which returns the seat to just past the halfway point of the track regardless of its original position.

• The recliner and easy entry levers should not be used during the automatic returning of the seat to its sitting position.

    See also:

    Front Panel(s) Installation With Rear Hard Top Removed
    1. Turn the left and right panels over and move the spacer block (located on the rear of the panel) upward 90 degrees. NOTE: The front panel(s) must be positioned properly to ensure sealing. Set ...

    Memory Position Recall
    NOTE: The vehicle must be in PARK to recall memory positions. If a recall is attempted when the vehicle is not in PARK, a message will be displayed in the Electronic Vehicle Information Center ( ...

    Preparations For Jacking
    1. Park the vehicle on a firm level surface as far from the edge of the roadway as possible. Avoid icy or slippery areas. WARNING! Do not attempt to change a tire on the side of the vehicle c ...